Mounting paper is to use the natural tension of paper to glue the paper wet with water to cardboard, wood and other objects. After drying, the paper is very flat. In the past, it was generally the preparation for drawing and painting, but now it is mainly used for the processing of cartons and cartons.

The paper mounting machine is the machine to complete this work procedure. It is composed of a paper feeding mechanism, a paper mounting mechanism and a paper pressing mechanism. Two wind heads are arranged in parallel on the paper feeding mechanism. A middle positioning mechanism is arranged on the paper mounting mechanism. The paper mounting mechanism is divided into two paper paths. Wing spring plates are arranged on both sides of the paper mounting mechanism. The middle positioning mechanism is composed of a middle positioning guide block and a lifting mechanism The mechanism is composed of the middle positioning guide block and the lifting mechanism, and the lamination is to coat the plastic film with adhesive, and combine it with the printed matter taking the paper as the substrate after being pressurized by the rubber roller and the heating roller to form a paper plastic product. After the film covering of the printed matter, due to the surface of a thin and transparent plastic film, the surface is more smooth and bright. This machine lamination is a molding, the consumables have been coated with glue, lamination by heating to melt the glue, and then by pressing the film on the printed matter.

The structure is simple, improves the production efficiency, adapts to the different size paper request, is one kind does not have the restriction to the paper size, not only enhanced the printed matter glossiness and the fastness, extended the printed matter service life, simultaneously the plastic film also has the waterproof, the antifouling, the wearproof, the folding, the chemical corrosion and so on the protection function. The common paper mounting machines include semi-automatic paper mounting machine, which is used for single-sided paperboard overlaying, partial and integral paper mounting, gray paperboard partial and integral paper overlaying, double-sided label mounting and windowing, and full linkage paper mounting machine specially designed for short tile line of narrow paper production. The bonding compressive strength, flat pressure strength, bursting strength and bonding of paper mounting machine are important physical indexes of corrugated box. The strength is related to the processing technology of paper and paperboard, and the bonding is inseparable from composite glue. Veneer bonding directly affects the next process of the carton and the customer's online packaging. Gluing becomes an important part of the laminating process. If the gluing is uneven and the bonding is not good, the cardboard surface will blister, the back of the cardboard will stick glue, and the rubber powder can be seen on the corrugated board.

The processing accuracy of paper mounting machine determines the uniformity of gluing. The accuracy of the outer and inner circles of the cots requires that the roundness of the cots after passing through the outer car and the inner car should be accurate and consistent, and the wheel eccentricity and glue throwing will not occur after 2 years of operation. The accuracy of the veneering machine should remain unchanged for at least 5 years. The automatic machine adopts built-in glue tank, closed pump and hydraulic glue supply, which is uniform, safe and hygienic.

Detailed inquiry: Mr. Ye liming-13903151509 / Mr. Ye lishu-13703343719