1. The sensor element of the temperature controller uses the electric thermocouple to detect the temperature. Due to the great influence of the installation position, the surrounding air temperature and the internal air flow, the temperature measurement accuracy has a large error. The temperature indicated on the thermometer is the relative temperature. The user should select the temperature according to the actual processing experience and the relative reference thermometer.

2. Glue, diluent and cleaning agent are flammable. Pay attention to fire near the machine.

3. When the machine is running, it is forbidden to put your fingers into the two rollers to avoid hand pricking. The temperature of the pressing roller of the machine is high. Do not touch it with hands to prevent scalding.

4. Start the machine at low speed when scrubbing. It should be scrubbed in the correct position, and the cloth in the tow hand should be strictly prevented from being crushed by two rollers.

5. When repairing and checking the machine, turn off the main power switch of the machine. The electrical system of the machine should be well insulated to prevent moisture. Cut off the power when you stop using the machine to prevent accidents.

6. It is strictly forbidden to put any tools, devices and sundries on the machine. The working air gap of the rubber coating roller and the rubber leveling roller is very small. Once any hard object is pressed into the surface of the rubber roller, it will leave a indentation or crack on the rubber. Light need a long time of natural elastic recovery, heavy directly when cots scrap.

7. The newly installed machine should strengthen the lubrication of the machine, and pay attention not to use the machine quickly during the running in period of the machine transmission.

8. During shutdown. Be sure to unload the pneumatic system, separate the pressing roll from the rubber roll in time, and loosen the scraper and the preloading roll, so as to avoid the long-term deformation and damage of the two rolls.

Detailed inquiry: Mr. Ye liming-13903151509 / Mr. Ye lishu-13703343719