1. Should often check whether there is adhesive rubber, grease on the cots, and timely scrub the rubber marks and dust on the cots. Ensure that the surface of the two rollers is clean and bright.

2. The surface of each roller must be kept clean strictly. After using the machine every time, the machine must be cleaned immediately. The roller can be washed with glue thinner and wiped with soft towel. It is strictly forbidden to scrape the roller surface with sharp tools.

3. Every time the machine is started up, the dust on the surface of each roller should be cleaned. And check whether the surface of each roller of the machine is smooth, if there is any fault or abnormal sound in the machine, analyze and find out the cause in time, and eliminate it, and continue to use the machine after everything is normal.

4. The power switch box must be a power switch box with ground wire to ensure power safety.

5. Mulching workshop is the best dust-free workshop to ensure the effect of mulching.

6. Before laminating, the dust on the equipment and the laminating cots must be completely removed.

7. When the laminating machine is running, it is forbidden to extend your fingers into the two rollers to avoid hand pricking. The temperature of the pressing roller of the machine is high, so do not touch it with your hands to prevent scalding.

8. When the machine is running, do not open the door panel of the case to avoid electric shock or hand injury by the gear.

9. When carrying out maintenance or repair inspection, the main power supply must be cut off. Live maintenance or repair is not allowed. The electrical system of the machine shall be well insulated to prevent moisture. When the machine is stopped, the power supply shall be cut off to prevent accidents.

10. During maintenance or repair, the heating pipe should be removed. Please handle it with care to avoid damaging the heating pipe.

Detailed inquiry: Mr. Ye liming-13903151509 / Mr. Ye lishu-13703343719